High quality customized led flood light wholesale provider: The most frequently used metal halide is sodium iodide. As the electric arc increases gas temperature, sodium dissociates from the iodine, adding orange as the metal ionizes. Metal halide lights offer higher efficacy than their counterparts. They produce up to 75-100 lumens per watt of electricity consumed. They primarily use lighting applications like sports arenas, automotive headlamps, and public places. They take time to reach full operating conditions as the pressure and temperature inside the gaseous mixture tube take time to warm up. This period can be as long as five minutes. As the metal halide lamp ages, the outer glass tube becomes weakened due to operational heat stresses. The pressure inside the tube can reach up to 3.5 atm. The tube at the end of life usually breaks inside the outer glass casing. Generally, their life span is < 20,000 lumens. Discover extra details at led street light manufacturers.
Cities are turning smart with better control over roadway lighting, protecting the environment and human health. A decrease in energy consumption through intelligent control can involve proximity sensors, timers, and solar detectors. It enables the city administrations to install more street lights, thus improving safety and security. However, not all LEDs have regulation capabilities. The LED needs to be dimmable with the following features: It is a dimming functionality that requires a compatible LED driver. It regulates the brightness of the LED or turns it ON/OFF based on a control signal that works between 0 and 10V. If 0V is supplied, the LED turns OFF, whereas 10V means maximum brightness. It requires connecting an additional control circuit for brightness control.
The waterproof problem of the lamp: How should the lamp holder be waterproof? Many street lamp manufacturers take this into consideration when they produce LED street lamp caps. Most street lamp caps are waterproof. Not only that, many led outdoor street lights have protection grades of IP65 or IP66, which can completely prevent dust from intruding, and will not seep in rainstorms, and are not afraid of bad weather. However, it cannot be generalized. The waterproof performance of LED street lights also depends on the manufacturing capacity and level of street lamp manufacturers. Large manufacturers can be more trustworthy, but small workshops may not be able to guarantee the quality. It is recommended to confirm the test report of the product before purchasing.
The indoor table tennis room originally used 36 1000W lighting light boxes, the glare was serious and unevenly distributed, and the field illumination was less than 100lx, which was not conducive to the development of table tennis. In order to ensure the professionalism of table tennis lighting,CHZ-LIGHTING uses 124 36W professional anti-glare LED panel lights, which are made of special water chestnut plates, UGR<19, and are reasonably arranged above the venue. After testing, the average illuminance of the venue is above 300lx, the uniformity is above 0.6, the light is soft and bright, and there is no glare interference. The healthy eye-protecting light makes the eyes more comfortable.
The LED tube uses a light-emitting diode as a light source, which has higher luminous efficiency, is more energy-saving, has a longer service life, and is more environmentally friendly. It is the ideal product to replace fluorescent tubes at this stage. The LED tube and the traditional fluorescent lamp are the same in the outer size. There are T5 tube, T8 tube and T10 tube. The length is 0.6m, 0.9m, 1.2m, 1.5m, 1.8m, 2.4m. The installation of the LED tube is very simple. When installing, the original fluorescent lamp is removed and replaced with the LED tube, and the ballast and the starter are removed, so that the 220V AC mains can be directly applied to the ends of the LED tube.
Our LED light fixture can be divided into indoor LED lighting and outdoor LED lighting according to the place where LED lamps are used. Indoor lighting requires high brightness, good color consistency, high color rendering, and high versatility. Outdoor lighting requires high brightness, long life, and good resistance to harsh environments. Our LED lamps feature high luminous efficiency, low energy consumption, long life, safety, and environmental protection. They can operate for more than 50,000 hours without failure, widely used in factories, warehouses, shopping malls, roads and other public places that require long-term lighting.
Flood lighting, also known as the LED spotlight and LED projection light, is controlled by built-in microchips. There are two types of chips, one is the combined power chip and the other is a single high-power chip. The former has a more stable performance, but the later has a large structure and can achieve very high power to offer long-distance and large-area illumination. LED flood light illuminates the surface higher than the surrounding. It is also known as the spotlight. Typically, the best LED flood light can be aimed in any direction and its structure is seldom affected by climates.
Enclosure: Using efficient Fishbone radiator with elegant appearance. The die-cast aluminum housing is electrostatically sprayed, sprayed with a polyester powder coating, treated with an anti-corrosive primer, and cured in a 180oC oven. Cable: Using silicone rubber cable for safe and efficient power input. It is secured in the cable gland with screws. Warranty: 5 year warranty for the entire lamp. Do not attempt to disassemble the casing as this will break the seal and invalidate all warranties. Certificates: ENEC, TUV, and RoHS. Quality Control: Strict testings including high and low temperature testing, waterproof testing, shock testing, aging testing, tensile testing, salt spray testing, are conducted to ensure long-term performance. Discover additional information at https://www.chz-lighting.com/.
Street lights or street lamps are helpful as they illuminate roadways, parking lots, sidewalks, and other public areas where people gather. Apart from improving driving safety, street lights also enhance the security of a site by improving vision in poor light conditions. Most of these street lights are often used with other traffic safety equipment that enhances visibility and removes all the obstacles in darkened areas. You need to understand that the primary function of street lights is to illuminate rooms or objects that would otherwise be in darkness or out of focus, especially at night.
The technology of HID lamps can be traced back to 1675, when Jean-Felix Picard discovered that his mercury barometer glows when shaken. However, the first HID commercially available bulb was made in 1965. It produces 95 lumens/watt, which is competitive with HPS and LED but also has similar omnidirectional light problems. The electricity that goes into the bulb passes through the xenon gas inside the glass chamber. It causes the xenon gas to ionize, forming an arc that vaporizes sodium and mercury to create light. The light is yellow in the range of 1900 to 2000 degrees Kelvin. These lamps have low color rendering capabilities. HID lamps also pass high electricity through a gas to create light. They require a ballast to operate. They contain tungsten electrodes inside a fused alumina arc or quartz tube. The noble gas of suitable metal or metal salt is used to enable the arc’s initial strike. They are also known as arc lamps.