Top rated street lights provider: The technology of HID lamps can be traced back to 1675, when Jean-Felix Picard discovered that his mercury barometer glows when shaken. However, the first HID commercially available bulb was made in 1965. It produces 95 lumens/watt, which is competitive with HPS and LED but also has similar omnidirectional light problems. The electricity that goes into the bulb passes through the xenon gas inside the glass chamber. It causes the xenon gas to ionize, forming an arc that vaporizes sodium and mercury to create light. The light is yellow in the range of 1900 to 2000 degrees Kelvin. These lamps have low color rendering capabilities. HID lamps also pass high electricity through a gas to create light. They require a ballast to operate. They contain tungsten electrodes inside a fused alumina arc or quartz tube. The noble gas of suitable metal or metal salt is used to enable the arc’s initial strike. They are also known as arc lamps. See even more information at floodlights manufacturer.
The Ingress Protection (IP) is a set of international ratings that tells how much an electrical device is dust and water-resistant. For example, an IP65 rating means the device is dust-resistant and can protect itself against water splashes. The IK ratings are a set of international standards that define the degree of protection for an electrical enclosure against external mechanical impacts. The numeric representation of the IP/IK rating is from 0-10. A higher IK08 rating means the electrical flood light can withstand physical shocks. Having a solid IP/IK rating is vital for installation in a public place. Manufacturers refer to a flood light’s lifespan in terms of working hours (h). Working hours depend on multiple factors, including the type of lamp and the weather conditions in which it is installed. LED-type floodlights offer the most working hours, up to 50,000 hours.
LED: Semiconductors on a PCB or Board – The light-emitting part inside an LED roadway light is a semiconductor material. Silicon is an abundant material that manufacturers use to produce LED (Light Emitting Diode). There are various ways to manufacture an LED. Here are their descriptions: Wire Bond COB – Wire bonding connects an Individual LED or semiconductor to the substrate. Wire bond LED technology is simple to manufacture, as the integrated circuit is prepared to bond directly to the substrate. Multiple small LEDs are connected to the substrate or PCB, which are then covered by epoxy to seal and protect the electronic circuitry.
Industry Lighting is made of super bright LED white light as the light source, the shell is made of aluminum alloy (customer optional), the outer cover is made of high efficiency lens (customer optional), heat dissipation is made of copper sheet heat conduction and aluminum alloy strip heat dissipation natural air circulation The heat dissipation is more perfect, and the shape of the LED will be changed continuously according to the different needs of the customers.
Our LED light fixture can be divided into indoor LED lighting and outdoor LED lighting according to the place where LED lamps are used. Indoor lighting requires high brightness, good color consistency, high color rendering, and high versatility. Outdoor lighting requires high brightness, long life, and good resistance to harsh environments. Our LED lamps feature high luminous efficiency, low energy consumption, long life, safety, and environmental protection. They can operate for more than 50,000 hours without failure, widely used in factories, warehouses, shopping malls, roads and other public places that require long-term lighting.
CHZ Lighting is specialized in LED sports field lighting for over 12 years, and now is the leading LED stadium lighting supplier for football field lights and other sports lights. The competitive advantage of CHZ LED sports field lighting: Imported original chip, high-quality light source. CHZ stadium LED flood lights are internally and externally painted with long-lasting coating. They are built with high-pressure cast aluminum electric box, stainless steel or chrome-plated fittings, making installation flexible and convenient. And the patented scuba technology makes the optical system more precise and efficient.
Enclosure: Using efficient Fishbone radiator with elegant appearance. The die-cast aluminum housing is electrostatically sprayed, sprayed with a polyester powder coating, treated with an anti-corrosive primer, and cured in a 180oC oven. Cable: Using silicone rubber cable for safe and efficient power input. It is secured in the cable gland with screws. Warranty: 5 year warranty for the entire lamp. Do not attempt to disassemble the casing as this will break the seal and invalidate all warranties. Certificates: ENEC, TUV, and RoHS. Quality Control: Strict testings including high and low temperature testing, waterproof testing, shock testing, aging testing, tensile testing, salt spray testing, are conducted to ensure long-term performance. See extra info at https://www.chz-lighting.com/.
Nowadays, the LED street light design and manufacturing technology is getting better and better. Whether it is a modular led street light or an integrated led street light, the quality can meet the needs of different usage scenarios. The specific choice of light source still needs to be based on actual needs and verified with the supplier determine. CHZ lighting company can provide complete lighting solutions, you are welcome to contact us.
CHZ Lighting focuses on LED outdoor lighting and high-power indoor lighting. The company has always adhered to the high standards of “leading technology and leading quality”, constantly developing new products, leading the trend of intelligence, insisting on the use of high-quality raw materials and advanced production technology, and focusing on the manufacture of each lamp. The main products have passed TUV, ENEC, CB, ROHS, UL, DLC, CE, SAA, and other international standards certification.
The indoor table tennis room originally used 36 1000W lighting light boxes, the glare was serious and unevenly distributed, and the field illumination was less than 100lx, which was not conducive to the development of table tennis. In order to ensure the professionalism of table tennis lighting,CHZ-LIGHTING uses 124 36W professional anti-glare LED panel lights, which are made of special water chestnut plates, UGR<19, and are reasonably arranged above the venue. After testing, the average illuminance of the venue is above 300lx, the uniformity is above 0.6, the light is soft and bright, and there is no glare interference. The healthy eye-protecting light makes the eyes more comfortable.